iXRLabs

Implementation & Onboarding Guide

From Purchase to Classroom – We’re With You at Every Step.

Getting started with iXRLabs is simple. From hardware configuration and software deployment to faculty training and ongoing support, our dedicated team works with your institution to ensure a smooth implementation and successful adoption.

Turbofan jet engine machine module in iXRLabs Engineering, shown in Explore mode inside a Meta Quest headset
Turbofan jet engine in Explore mode, iXRLabs Engineering
Stages
Seven, from purchase to continuous support
Your contact
A dedicated Customer Success Manager
Supported platforms
Meta Quest and HTC VIVE (PC-based)
XR expertise needed
None — we guide every step

Your implementation journey

Every iXRLabs implementation follows the same seven stages. Select a stage to see what happens and who is involved.

  1. Stage 1Purchase & Customer Success Manager Assignment
  2. Stage 2Hardware Readiness
  3. Stage 3Software Deployment
  4. Stage 4License Activation
  5. Stage 5SPOC & Faculty Training
  6. Stage 6Classroom Rollout
  7. Stage 7Continuous Support

Stage 1

Your Implementation Begins Here

Once your iXRLabs license is purchased, our Customer Success team will connect with you to initiate the implementation process.

During the initial discussion, we will establish:

  • Hardware availability and headset configuration.
  • Software licenses and subscribed learning modules.
  • Institutional points of contact (SPOCs).
  • Deployment and faculty training schedules.

Stage 2

Getting Your VR Lab Ready

Depending on whether you are using existing hardware or procuring new devices, our team will guide you through the necessary hardware setup.

Basic requirements

  • Compatible VR headsets and controllers.
  • Stable internet connectivity.
  • Dedicated and safe space for VR usage.
  • Charging and secure storage facilities.
  • Compatible VR-ready computers for PC-based headsets, where applicable.

Our team will assist with initial headset configuration, connectivity, controller setup and device readiness. The hardware configuration process may vary depending on the headset selected.

Illustration of a Meta Quest Guardian boundary marking a clear, safe play area around a user
A clear play area with a configured Guardian boundary is part of every Meta Quest setup.

Stage 3

Choose Your Deployment Approach

The installation process varies depending on your VR hardware and device management approach. Select your preferred deployment method to view the relevant steps.

Meta Quest with individual Meta accounts

Each headset is configured with a dedicated Meta account.

  1. If your headsets are already configured, our team will request the registered Meta email IDs.
  2. For new headsets, we will guide you through creating dedicated institutional email IDs, setting up Meta accounts and configuring the devices.
  3. Our team will share iXRLabs application invitations with the registered Meta IDs.
  4. Accept the invitation using the corresponding Meta account.
  5. Download and install the iXRLabs application directly onto the respective headsets.
  6. Proceed with license activation.

We recommend using one dedicated institutional email ID per headset instead of personal faculty or student email addresses.

Meta Quest headset with left and right Touch controllers

Already have Meta Quest headsets?

Our team will work with your existing Meta accounts and guide you through the software deployment process.

Stage 4

Activate Your iXRLabs License

Once the application is installed, our team will provide the necessary license credentials. The license activation process is common across supported hardware platforms.

  1. Launch the iXRLabs application.

    Open it from the headset’s app library or, on HTC VIVE, from your computer.

  2. iXRLabs screen asking the user to enter a Master License Key

    Enter your Master License Key.

    Shared separately by the iXRLabs team.

  3. iXRLabs screen asking the user to enter a Student Key, with an option to log in using a user ID

    Enter your Student Key, as applicable.

    Or log in with a user ID where your setup uses one.

  4. iXRLabs main menu with branch selection, module library and favourites panel

    Access and download your subscribed learning modules.

    Browse by branch, then download modules to the device.

Our team will assist in verifying successful activation and application functionality across the deployed devices.

Stage 5

Empowering Your Faculty to Get Started

Once hardware configuration, software installation and license activation are complete, we initiate a structured training programme for your institution.

Training stage 1

Institutional SPOC Training

The institution is requested to nominate one or more designated points of contact, typically lab coordinators, IT administrators or faculty members. An initial focused training session is conducted with these representatives.

Training covers

  • Hardware operation and device management.
  • Software installation and application management.
  • License management.
  • Basic troubleshooting.
  • VR lab administration.
  • Coordination with iXRLabs Customer Success.

Objective: trained personnel at your institution who can independently manage day-to-day VR lab operations.

Training stage 2

Comprehensive Faculty Training

Following SPOC training, a broader training session is conducted for relevant faculty members.

Training covers

  • Headset usage, controllers and safety guidelines.
  • Application navigation and learning modules.
  • Interactive simulations and assessments.
  • Casting and classroom demonstrations.
  • Integrating immersive learning into existing teaching practices.
  • Managing student usage and VR lab sessions.
Meta Quest Touch controller mapping used in iXRLabs: move, menu, select, grab and rotate camera
Training is tailored to your subscribed iXRLabs products and your institution’s hardware configuration.
Virtual materials-testing lab in iXRLabs with a computerised universal testing machine
Universal Testing Machine experiment, iXRLabs Engineering.

Stage 6

Bringing Immersive Learning Into Your Classroom

Following faculty training, your institution is ready to begin using iXRLabs in regular academic sessions.

Our Customer Success team will assist with initial rollout, address operational queries and help faculty effectively integrate VR experiences into their teaching and learning workflows.

Key areas of assistance

  • Planning initial VR lab sessions.
  • Helping faculty identify relevant learning modules.
  • Supporting classroom demonstrations.
  • Addressing initial operational challenges.
  • Encouraging consistent adoption across departments.

Stage 7

Our Support Continues Beyond Deployment

Our engagement continues beyond installation and training. Your dedicated Customer Success Manager remains your primary point of contact throughout your iXRLabs journey.

  • Dedicated Customer Success Manager

    A single point of contact for your institution’s ongoing requirements.

  • Software & License Support

    Assistance with application access, installation, activation and license-related queries.

  • Hardware Troubleshooting

    Guidance for headset configuration, connectivity and basic hardware issues.

  • Updates & New Content

    Guidance on application updates and new learning content availability.

  • Faculty Onboarding

    Coordination of refresher training and onboarding for new faculty members.

  • Adoption & Usage Support

    Assistance in integrating immersive learning into regular academic activities.

  • Technical Support & Escalation

    Coordination with the relevant technical teams for issue resolution.

What We Need From Your Institution

Have these ready and we’ll take care of the rest. You don’t need prior technical expertise in XR — iXRLabs will guide you through the entire process.

  • Details of existing or newly procured VR headsets.
  • Registered Meta email IDs, if devices are already configured.
  • Dedicated institutional email IDs, where required.
  • Stable internet connectivity.
  • Access to institutional IT support, where required.
  • One or more designated institutional points of contact.
  • Availability of relevant faculty members for training.
  • A safe and suitable space for VR lab operations.

Everything You Need to Get Started

Access our detailed setup guides, checklists and user manuals for step-by-step assistance with your iXRLabs deployment.

  • Hardware Setup Checklist

    Preparing your Meta Quest devices for successful deployment.

    PDF, 4 pages, 316 KB

    Download PDF
  • Meta Quest Hardware User Manual

    A comprehensive guide covering headset setup, charging, controllers, connectivity, safety, cleaning, storage, casting and troubleshooting.

    PDF, 26 pages, 1.4 MB

    Download PDF
  • Meta for Work Setup & Operating Guide

    A step-by-step guide to centralized headset enrollment, application distribution, device management and casting.

    PDF, 26 pages, 7.1 MB

    Download PDF
  • iXRLabs Engineering User Manual

    A detailed guide covering software installation, license activation, application navigation and usage of engineering learning modules.

    PDF, 23 pages, 3.2 MB

    Download PDF

Implementation questions, answered

What happens after we purchase an iXRLabs license?

The iXRLabs Customer Success team connects with your institution and assigns a dedicated Customer Success Manager. Together you confirm hardware, subscribed modules, institutional points of contact and the deployment and training schedule, then move through hardware readiness, software deployment, license activation, SPOC and faculty training, classroom rollout and continuous support.

Which VR headsets does iXRLabs support?

The iXRLabs Engineering application runs on compatible Meta Quest devices, including Meta Quest 2, Meta Quest 3, Meta Quest 3S and Meta Quest Pro. iXRLabs also provides a direct installation for compatible HTC VIVE PC-based headsets on VR-ready computers. Your Customer Success Manager confirms compatibility for your specific hardware.

Can we use VR headsets we already own?

Yes. If your Meta Quest headsets are already configured, the iXRLabs team works with your existing Meta accounts and guides you through software deployment.

Do we need XR or VR technical expertise to get started?

No. iXRLabs guides your institution through hardware setup, software deployment, license activation and training. You need a nominated point of contact, stable internet, a safe space for VR use and faculty availability for training.

Why does iXRLabs recommend one institutional email ID per headset?

A dedicated institutional email ID for each Meta Quest headset, instead of personal faculty or student addresses, simplifies device administration, troubleshooting and credential management. The Meta account must be created with a date of birth indicating the account holder is 18 or older.

Is Meta for Work available for every institution?

iXRLabs supports deployment through Meta for Work subject to regional availability and eligibility. Your Customer Success Manager will help you confirm whether it suits your institution.

Is license activation different for Meta Quest and HTC VIVE?

No. Once the application is installed, license activation is the same across supported hardware platforms: launch the app, enter the Master License Key, enter the Student Key as applicable, then access and download subscribed modules.

What is a SPOC in an iXRLabs implementation?

A SPOC is the institution’s single point of contact, typically a lab coordinator, IT administrator or faculty member. SPOCs receive focused training on hardware, software, license management, basic troubleshooting and VR lab administration so they can manage day-to-day operations.

Can faculty show what a student sees in the headset to the whole class?

Yes. Meta Quest headsets can cast the headset view to a laptop, PC, projector or smartboard on the same Wi-Fi network, and Meta for Work deployments can cast and monitor headset screens from the Facilitator Suite where supported. Casting is covered in faculty training.

Last reviewed:

Ready to Get Started?

Whether you are setting up a new VR lab or integrating iXRLabs into your existing infrastructure, our team is here to support you at every step.